frame K 15, 150 x 150 mm

for all gratings S 15 155 mm long, cut to suit on site with: - push fit seal material: polypropylene

for all gratings S 15 155 mm long, cut to suit on site with: - push fit seal material: polypropylene

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: DN 50/DN 70 horizontal, with double ball-joint, adjustable 0-55° with: - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye.

conforming to DIN EN 1253. outlet: DN 50/DN 70 horizontal, with double ball-joint, adjustable 0-55° with: - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye.

conforming to DIN EN 1253 outlet: DN 50/DN 70 horizontal double ball-joint, adjustable 0-55° with: - DN 50 side inlet, swivelling 180° - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: DN 70/DN 100 horizontal with: - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye.

conforming to DIN EN 1253 outlet: DN 70/DN 100 horizontal with: - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye. DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: DN 70/DN 100 horizontal with: - DN 50 side inlet - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye. DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253 outlet: DN 70/DN 100 horizontal with: - DN 50 side inlet - trap with rodding eye ** - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire. ** Access to trap and outlet via rodding eye. DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical, for connection to SML cast iron pipework with: - removable bell trap - temporary blanking plate material: polypropylene

DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical, for connection to SML cast iron pipework with: - removable bell trap - temporary blanking plate material: polypropylene

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical, for connection to SML cast iron pipework with: - removable bell trap - temporary blanking plate material: polypropylene

conforming to DIN EN 1253 outlet: vertical, for connection to SML cast iron pipework with: - removable bell trap - temporary blanking plate material: polypropylene

conforming to DIN EN 1253 outlet: vertical, for connection to SML cast iron pipework with: - removable bell trap - temporary blanking plate material: polypropylene

conforming to DIN EN 1253 outlet: vertical, for connection to SML cast iron pipework with: - removable bell trap - temporary blanking plate material: polypropylene

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical spigot, for connection to plastic pipework with: - stainless steel liner - removable bell trap - temporary blanking plate material: polypropylene/304 stainless steel

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical spigot, for connection to plastic pipework with: - stainless steel liner - removable bell trap - temporary blanking plate material: polypropylene/304 stainless steel

DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical spigot, for connection to plastic pipework with: - removable bell trap - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical spigot, for connection to plastic pipework with: - removable bell trap - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire.

conforming to DIN EN 1253 outlet: vertical spigot, for connection to plastic pipework with: - stainless steel liner - removable bell trap - temporary blanking plate material: polypropylene/304 stainless steel

conforming to DIN EN 1253 outlet: vertical spigot, for connection to plastic pipework with: - stainless steel liner - removable bell trap - temporary blanking plate material: polypropylene/304 stainless steel

DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253. outlet: vertical spigot, for connection to plastic pipework with: - removable bell trap - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire.

conforming to DIN EN 1253. outlet: vertical spigot, for connection to plastic pipework with: - removable bell trap - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire.

conforming to DIN EN 1253. outlet: vertical spigot, for connection to plastic pipework with: - removable bell trap - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical spigot, for connection to plastic pipework with: - removable bell trap - temporary blanking plate material: polypropylene

The outlet connector can be supplied in ABS to suit British Standard sizes and PE-HD conforming to DIN EN 1519. Please enquire.

conforming to DIN EN 1253 outlet: vertical spigot, for connection to plastic pipework with: - DN 50 side inlet - swivelling 180° - removable bell trap - temporary blanking plate material: polypropylene

DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.

conforming to DIN EN 1253. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. outlet: vertical spigot, for connection to plastic pipework with: - DN 50 side inlet, swivelling 180° - removable bell trap - temporary blanking plate material: polypropylene

Design grate Cut material: 5 mm 316Ti stainless steel, satin finish, load class K 3 (300 kg).

Colour coated grates on request.

for 150 x 150 mm frame 304 stainless steel, class K 3 (300 kg)

Colour coated grates on request.

for 150 x 150 mm frame with secured gratings 304 stainless steel, with screws, class K 3 (300 kg)

Colour coated grates on request.

for 100 x 100 mm, 150 x 150 mm, 200 x 200 mm frame with secured gratings 5 mm 316Ti stainless steel, with screws, class L 15

Colour coated grates on request.

for 150 x 150 mm frame polyamide, class K 3 (300 kg)

Colour coated grates on request

for 150 x 150 mm frame grate with incorporating centrally recessed for 50 x 50 mm stone, satin finish, 5 mm 316Ti stainless steel, 140 x 140 mm

Colour coated grates on request.

for 150 x 150 mm frame grate with incorporating centrally recessed for 50 x 50 mm stone, satin finish, 5 mm 316Ti stainless steel, 140 x 140 mm

Colour coated grates on request.

for 150 x 150 mm frame grate with incorporating centrally recessed for 50 x 50 mm stone, satin finish, 5 mm 316Ti stainless steel, 140 x 140 mm

Colour coated grates on request.

for 150 x 150 mm frame grate with incorporating centrally recessed for 50 x 50 mm stone, satin finish, 5 mm 316Ti stainless steel, 140 x 140 mm

Colour coated grates on request.

for 150 x 150 mm frame grate with incorporating centrally recessed for 50 x 50 mm stone, satin finish, 5 mm 316Ti stainless steel, 140 x 140 mm

Colour coated grates on request.

for 150 x 150 mm frame grate with central recess for 50 x 50 mm stone insert satin finish, 5 mm 316Ti stainless steel, 140 x 140 mm

Colour coated grates on request.

conforming to DIN 51130/DIN 51097 for 150 x 150 mm frame in swimming and shower areas non-slip class B, 5 mm 316Ti stainless steel, secured, class R 12, L 15

Type RHS 140 grate non-slip Class C on request. Colour coated grates on request.

conforming to DIN 51130/DIN 51097 for 150 x 150 mm frame in swimming and shower areas non-slip class B, 5 mm 316Ti stainless steel, secured, class R 12, L 15

Type RHS 140 grate non-slip Class C on request. Colour coated grates on request.

used with gratings and frames series S 15 with dimension 150 x 150 mm and with utility drains 57 AK and 61 AK material: polypropylene

used with floor drain types 54/55, 57/58, 61 and 61/1. With Ø 500 mm collar of 4.7 mm thick bituminous membrane, welded to the flange and secured with stainless steel clamp ring. with: - S 15 seal - temporary blanking plate material: polypropylene supplied with or without sealing kit

used with floor drain types 54/55, 57/58, 61 and 61/1 with: - S 15 seal - temporary blanking plate material: polypropylene supplied with or without sealing kit

used with floor drain types 54/55, 57/58, 61 and 61/1 with: - S 15 seal - temporary blanking plate material: polypropylene supplied with or without sealing kit